Industrial Steam · Serving plants across IndiaFor Kitchens →

Industrial Steam & Boiler Fuel

Lower-cost steam.Two ways to switch.

Vista replaces furnace oil, diesel, LPG and gas with biomass. We supply the fuel, convert your boiler, or build and run one on your site and bill you per tonne of steam.

Up to 40%lower fuel cost, proven on your own invoices
2ways to switch: convert your boiler, or buy steam
>3,800kcal/kg GCV on Vista Max

Why switch

Fuel is your largest recurring cost. It's also the easiest to cut.

Oil and gas tie your steam cost to markets you can't control. Biomass grown and processed in India gives you a long-term price, a shorter supply chain and a cleaner Scope 1 line.

Fuel at a glance
Grades
Vista Plus · Vista Max
GCV
>3,400 / >3,800 kcal/kg
Pellets
6–8 mm · ≤10% moisture
Briquettes
90 mm · <15% moisture
Ash
Tested on every lot
Models
Conversion or steam supply

Two models

Own the boiler, or just buy the steam.

OPTION 01

Convert Your Boiler

We retrofit or replace the combustion system on your existing boiler for pellets or briquettes, with fuel feeding and ash handling. Fixed scope, fixed price, then an annual service plan.

FeasibilityRetrofitAnnual service
OPTION 02

Buy Steam, Not Equipment

We build, own and operate a biomass boiler on your premises. You pay for the tonnes of steam you use, at agreed parameters, under a long-term contract.

Zero capexPay per tonneGuaranteed parameters
Option 01Convert Your BoilerOption 02Buy Steam
UpfrontFixed-price project, paid by CustomerNone. Vista funds the equipment
OwnershipCustomer owns the converted boilerVista owns the boiler on your site
OperationsCustomer's team, backed by our service planVista runs and maintains it end to end
Fuel & ashFuel from Vista; ash system includedFuel, ash and residue handled by Vista
You payProject cost, then fuel per tonnePer tonne of steam used
Best forPlants that want to own their utilityPlants that want capital and people on core operations

Fuel

Two grades, two forms, one spec sheet.

Both grades come as pellets for automated feeders or briquettes for higher-volume burners. Every lot is tested for moisture, ash and GCV before it leaves.

Vista Plus
>3,400 kcal/kg

>14.2 MJ/kg. Consistent boiler-grade fuel for process heat and steam.

Vista Max
>3,800 kcal/kg

>15.9 MJ/kg. Our highest-energy grade for high-demand boilers.

PelletsBriquettes
Size6–8 mm diameter90 mm diameter
Moisture≤10%<15%
GradesPlus · MaxPlus · Max

Supply

Running out mid-shift is the real fear. We design it out.

01

Source Mapping

Agricultural and process residue identified near your plant and priced across the year.

02

Processing

Residue densified into pellets and briquettes to a fixed specification.

03

Lot Testing

Moisture, ash and GCV checked on every batch before dispatch.

04

Scheduled Delivery

Recurring drops and buffer stock sized to your storage.

05

Ash Removal

Collected from site, so nothing piles up at the boiler house.

06

One Accountable Team

Fuel, equipment and service answer to the same people.

In the contract

Performance you can hold us to.

STEAM

Your Parameters

Pressure, temperature and quantity specified for your process, and delivered against.

UPTIME

Agreed Availability

Targets set upfront, with maintenance planned around your shutdown windows.

FUEL

Per-Lot Limits

GCV, moisture and ash limits on every lot, with test records on request.

EMISSIONS

Within SPCB Norms

Pollution-control equipment sized to your State Pollution Control Board limits.

REPORTING

Monthly Data

Steam delivered, fuel consumed, efficiency and fossil CO₂ avoided, formatted for GHG and BRSR reports.

CONTACT

One Point of Contact

A single team accountable for fuel, equipment, service and performance.

Who it suits

Plants that make steam from oil, diesel, LPG or gas.

Dairy & FoodPasteurising, cooking and CIP steam
Edible OilRefining and process heat
Pharma & APIReliable steam for regulated processes
Specialty ChemicalsProcess heat at steady parameters
Textile ProcessorsDyeing, finishing and drying
Any Boiler OperatorWho values consistent fuel quality

Process

From first visit to steady steam.

  1. Site StudyWe review your boiler, fuel invoices and steam demand.
  2. ProposalA fixed scope and price, or a guaranteed steam rate.
  3. InstallCommissioned around your shutdown windows.
  4. Run & SupportFuel delivery, maintenance and monthly reports.

FAQ

What plant heads ask us first.

Can you convert the boiler we already have?

In most cases, yes. A site study tells us whether a retrofit of the combustion system is the better route, or a replacement. Either way you get a fixed scope and price before you commit.

How is the steam price set on the service model?

We agree a rate per tonne of steam at your specified pressure and temperature, under a long-term contract. You pay only for what you use. The equipment is funded and owned by Vista.

How do you make sure we never run short of fuel?

We map residue sources near your plant, hold buffer stock sized to your storage, and schedule recurring deliveries. Supply continuity is written into the contract.

Does this help our Scope 1 and BRSR reporting?

Biomass CO₂ is reported as biogenic under the GHG Protocol, so switching lowers your reported Scope 1 fossil emissions. Our monthly reports include fossil CO₂ avoided in a format your GHG and BRSR teams can use.

What do you need for a site study?

Boiler capacity and make, working pressure and temperature, current fuel and monthly consumption, operating hours, storage space and your last six fuel invoices. For the steam model, we also ask for audited financials.

Site study

Get a saving estimate for your plant.

Share the basics and our team will come back with an estimate.

Rather talk to us directly?

Opens your email app with the details filled in.